Datasheen D902AW 사용자 설명서 - 페이지 13

{카테고리_이름} Datasheen D902AW에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Datasheen D902AW 19 페이지. Adsl2/2+ wifi router

3.5.1 WIRELESS SETUP

Click "Setup" on the left menu to setup basic wireless parameters. In default, check "Enable Ｗireless"

box to launch wireless AP.

SSID (Service Set Identifier): The mobile users cannot access WLAN until setting their SSID as the same



value of the wireless ADSL. The SSID value of the ADSL is "default"

Hidden Access Point: If checked, wireless station will no see SSID of the ADSL.



Press "Security" on the left menu to construct wireless security. You can select to configure WEP

encryption, Shared, 802.1x, WPA, and WPA2 authentication.



WEP Encryption

Select "Enabled" of the WEP encryption list. You can enter WEP encryption page.

Encryption Strength: Key length: 128bits or 64bits.

Network Key 1-4: Up to four keys that are in form of hex digitals could be set. Mobile users can't

access the AP if they haven't set the same key as AP. For 64bits and 128bits keys, you should input 10

and 26 hexadecimal digitals or 5 and 13 ASCII characters respectively. Every two digitals should be

comparted with others by a space character. For example: "7890ABCDEF" (hexadecimal digitals) or

"QWERT" (ASCII characters) for a key length of 64bits.

Page 13

Datasheen D902AW User Manual

Total 19 Pages