DV8 OFFROAD RBJL-13 설치 매뉴얼 - 페이지 5

{카테고리_이름} DV8 OFFROAD RBJL-13에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DV8 OFFROAD RBJL-13 13 페이지. Jl full width rear bumper

INSTALLATION

MANUAL

Begin by unpacking all items and

inspecting for missing pieces or damage. If

you have any concerns, please contact the

company the product was purchased from.

HARDWARE

INCLUDED

(4) M14x35 Hex Bolts

(14) M6 Flat Washers

(2) M14 Nylon Lock Nuts

(7) M6 Nylon Lock Nuts

(2) M14 Spring Washers

(2) M4x15 Philips Head

(6) M14 Flat Washers

Bolts

(2) M14 Nut Plates

(2) M4 Flat Washers

(2) M12x45 Hex

(2) M4 Spring Washers

(2) M12 Spring Washers

(2) M4 Nuts

(2) M12 Flat Washers

(7) M6x20 Allen

STEP 7 |

If equipped with factory

backup sensors, begin by removing the

harness from factory bumper to prepare

for install. Skip to step 13 if not equipped

with factory sensors.

If equipped with factory metal bumper,

you will be able to reuse the sensor

bezels/mounts. If equipped with factory

plastic bumpers, we highly recommend

using OE sensor bezels or DV8 part

#MPRSNSR-01.

Lay out the harness ensuring the main

plug for the harness is on the driver-side

of the bumper. Push out the DV8 sensor

plugs towards the front of the bumper.

NEED HELP?

855-680-9595