Datasheen D316S 빠른 설치 매뉴얼 - 페이지 5

{카테고리_이름} Datasheen D316S에 대한 빠른 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Datasheen D316S 6 페이지. 16-port; 24-port fast ethernet web-smart switch

Desktop Installation

1. Install the switch on a level surface that can support the weight

of the unit and the relevant components.

2. Plug the switch with the female end of the provided power cord

and plug the male end to the power outlet.

Rack-mount Installation

The switch may be standalone, or mounted in a rack. Rack mounting

facilitate to an orderly installation when you are going to install

series of networking devices.

Procedures to Rack-mount the Switch:

Disconnect all cables from the switch before continuing.

Place the unit the right way up on a hard, flat surface with the

front facing toward you.

Locate a mounting bracket over the mounting holes on one side

of the unit.

Insert the screws and fully tighten with a suitable screwdriver.

Repeat the two previous steps for the other side of the unit.

Insert the unit into the 19" rack and secure with suitable screws

(not provided).

Reconnect all cables.

Access the Web-based UI

To manage the switch through in-band access, you should configure

the management station with an IP address and subnet mask

compatible with your switch. For example, the default IP of switch is

192.168.1.1, you must set up your IP value in 192.168.1.2~253 and

subnet in 255.255.255.0.