DV8 OFFROAD SPEC Series 설치 매뉴얼 - 페이지 7

{카테고리_이름} DV8 OFFROAD SPEC Series에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DV8 OFFROAD SPEC Series 9 페이지. Rear bumper for 2018+ jeep jl wrangler
DV8 OFFROAD SPEC Series에 대해서도 마찬가지입니다: 제품 설치 매뉴얼 (10 페이지), 설치 매뉴얼 (12 페이지), 설치 매뉴얼 (10 페이지)

페이지 인쇄
DV8 OFFROAD SPEC Series 설치 매뉴얼
INSTALLATION
MANUAL
STEP 10 |
Install the brackets onto
the bumper using the provided M14x35
hardware. Use a 10mm allen bit, 21mm
socket, and a 21mm wrench.
We provided an allen head bolt to be used
for the exterior mounting on the bottom
corners.
Secure the brackets and leave only
enough slack for the brackets to be
adjustable.
STEP 11 |
Slide the nut plate into the
passenger frame rail lining it up with the
mounting holes on the bottom.
STEP 12 |
Lift the bumper to the
vehicle and loosely secure using the
factory hardware and a 21mm or 18mm
socket.
Ensure the wiring is not pinched during
install.
Note: It is recommended to open the tailgate
prior to installing the bumper.
The tool required may vary based on model.
NEED HELP?
855-680-9595