Datasheen KvmSwitch! CS16C 사용자 설명서 - 페이지 6
{카테고리_이름} Datasheen KvmSwitch! CS16C에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Datasheen KvmSwitch! CS16C 8 페이지. Usb & ps/2 auto kvm switch
페이지 인쇄
B . Under MAIN MENU mode: hit <F6> key for password editing and if the MASTER
password function has been already set, the OSD will ask for entering the password of
MASTER (as Figure(13)). Only when the password is entered correctly will the user be
allowed to use this device, OSD Shown as Figure(14).
C. Under MAIN MENU mode: hit <F6> key for password editing. If the password
function of MASTER is not set yet (UNIT PSW.) ,you can deit new password directly
(OSD screen shown as Figure(14)).
D. Enter Editing function shown as Figure(14)
a. Editing MASTER password (EDIT UNIT PSW.)
b. Editing PC password (EDIT PC PORT PSW.) including editing the PC password of
SLAVE.
E. Select 1 means to EDIT UNIT PSW. : Editing MASTER password, OSD will show as
Figure(15), user should type 1-8 characters (valid characters are <A-Z>, <0-9> and <->)
as the new password of MASTER and then press <ENTER> as confirmation. User
should keep the new password firmly in mind.
F. Select 2 to EDIT PC PORT PSW. : OSD will show as Figure(15). User can use
☞
or
to move
(CURSOR) and press <ENTER> to select PC. The procedure of PC
password edition is same as step 6.
10.
Enable Password:
A. If selected PC has setup the password. OSD will ask for entering the password of
the PC, (Shown as Figure (16)). Correct password is required to use the selected PC.
9
CS08S/ CS16C 8/16 PORT KVM SWITCH
B. When user enter the wrong password, the OSD will show message " ERROR"
(Shown as Figure(17)). User will be asked for re-entering the correct password.
C. Under Figure (16) mode, user can hit HOT-KEY once to enter HOT-KEY MAIN
MENU.
11. <F7> enter OSD position adjustable function
A. There are 2 kinds of OSD screen display adjustable, please refer to Figure(19). One
is to adjust MAIN OSD POSITION. The other is to adjust BANNER OSD POSITION.
CS08S/ CS16C 8/16 PORT KVM SWITCH