DVA GIX12V 빠른 시작 매뉴얼 - 페이지 3

{카테고리_이름} DVA GIX12V에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DVA GIX12V 5 페이지. Automatic water softener volumetric

CHOOSING THE PLACE OF INSTALLATION:

Waste water resulting from the regeneration must be

funneled into the floor sink by the flexible pipe.

If the floor sink is placed higher than the water

softener, the maximum height acceptable is 1.8

metres, provided that the pipe is not longer than 5

metres and the pressure of the water system is at

least 2.8 bar.

If the water softener is near a boiler, check that the

pipes and the water softener itself are not subjected

to overheating. If possible, install a pipe that keeps a

few meters' distance (at least 3) between the outlet

of the water softener and the inlet of the boiler.

Keep away from corrosive or acid products.

CONNECTION TO THE DRAIN SYSTEM (A).

The drain pipe is not flattened or bent, as water should

flow without impedements.

THE OVERFILL PROTECTION PIPE (B)

Insert flexible pipe in the quick joint, then connect the

pipe to a floor sink that must be placed under the quick

joint, because the water that may come out will

not be pressurized.

ELECTRIC AND ELECTRONIC COMPONENTS:

A-OPTICAL SENSOR

B-AC ADAPTER INPUT

C-MAIN MOTOR & OPTICAL SENSOR

D-VOLUMETRIC TURBINE INPUT

E-CHLORINE GENERATOR OUTLET