AUSPURE KITCHEN EasyDrip AusBrew-1812 사용자 설명서 - 페이지 8

{카테고리_이름} AUSPURE KITCHEN EasyDrip AusBrew-1812에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AUSPURE KITCHEN EasyDrip AusBrew-1812 20 페이지.

GETTING STARTED

Three operation modes

Your coffee maker has three states of operation once it is connected to the power

source. Via the control buttons, each mode can be set to operate accordingly.

1. Connected Mode

When the coffee maker plugs in, by default, it stays at connected mode. The LCD

will display AM 12:00 (Local time after setting the clock), and the indicator will

light up for 15 seconds. After 15 seconds the screen will turn off until pressing any

key again.

2. Normal Brew Mode

In the normal brew mode, you can start brewing your coffee by pressing On/Off

button once. During normal brewing mode operation, the indicator light (Above

the On/Off button) will turn on and illuminating in red colour.

Normal Brew Mode Function-1 (Pause-for-a-Cup Function)

Pause-for-a-Cup function enables under the normal brewing mode operation. As

long as there is water inside the coffee maker's water tank, it heats the water

continuously and injects hot water into the filter. The injecting water fuses with

the supplied coffee powder inside the filter tank. Coffee will be dripped into the

pot slowly, and once the pot is removed, the coffee dripping from filter will be

stopped for 20 sec. By the time the coffee pot is restored to the base, the coffee

in the filter restart dripping coffee to the pot.

NOTE:

Since Pause-for-a-Cup Function is set for just a few seconds, the user

should immediately reposition the pot in order to avoid overflowing from filter basket.

Normal Brew Mode Function-2 (Keep-Hot Function)

Keep-Hot Function automatically enables with red-light flashing once the water

in the water tank is used up. This function commands the coffee maker to heat

the coffee pot for 20-min. After 20-min, the red-light indicator turns OFF, and the

machine goes to connected mode.

NOTE-1:

If you serve entire coffee inside the pot, press the On/Off button to leave

Keep-Hot function manually.

NOTE-2:

For selecting Normal Brew Mode, if the machine is active in Auto Brew Mode,

press the On/Off button twice. The green light indicator will then turn to red light and

start brewing coffee.