AUSRANVIK APR-25D 사용 설명서 및 제품 사양 - 페이지 8

{카테고리_이름} AUSRANVIK APR-25D에 대한 사용 설명서 및 제품 사양을 온라인으로 검색하거나 PDF를 다운로드하세요. AUSRANVIK APR-25D 9 페이지.

——Fruit and vegetable should be put in the crisper for moisture retaining.

——Hot food should be cooled down before it's placed in, which could help to save

power.

——Food must be packed into freezer bags. Leave space between packaged foods

to keep the circulation of cool air.

Defrosting

■ After the refrigerator working for a period, frost could be seen on surfaces in the

freezer, which reduces cooling performanceand increases power consumption. In this

case, you need to defrost it.

■ Unplug the refrigerator and open the doors, take the food in the refrigerator to cool

place. Use defrosting shovel to remove ice and frost (also can just let the door open,

then ice and frost will be thawed by the raising temperature). Then use dishtowel to

wipe off the ice water. After that, place the food back to the refrigerator and plug in.

Note: Do not use sharp metal tools to defrost, you will possibly break the coil by doing

so.

10.

Unplug the refrigerator before cleaning!

■ Use soft cloth dampened with warm water to wipe the inner surfaces and external

appearance of the refrigerator.

■ Use neutral detergent to clean the heavy stains, and dry with clean soft cloth.

■ For long vacation or absences, remove food and unplug the refrigerator. Clean the

refrigerator and leave the doors open a little. Then place the refrigerator in

ventilated place.

NOTE: Do not sprinkle water on the refrigerator during cleaning because that would

reduce the insulating property of electrical components and erode the metal parts.

■ Do not use cleansers containing corrosive and deliquescent material ( such as

scouring powder, bleach, soap powder, alkaline cleansers, benzene, gasoline,

acid, hot water and etc.) to clean the appearance panels, door gaskets and plastic

parts.Following situations are normal

■ The flow of refrigerant through the evaporator may create a boiling or gurgling sound.

■ In the raining and high humidity weather, moisture may form on the outside of

refrigerator or door gaskets. You can wipe damp surfaces with dry cloth.

■ The temperature on the back panel may be high (particularly in summer) due to

heat

emission of the condenser.

■ The temperature on external surface of the compressor may be high when

compressor is working.

■ The compressor may cause a high hum or pulsating sound when it is at starting

stopping step.

■ It's normal to hear metal hit noise from compressor when refrigerator is bumped.