DataTale AU-S10 사용자 설명서 - 페이지 8

{카테고리_이름} DataTale AU-S10에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DataTale AU-S10 14 페이지. 2.5" mobile enclosure

ASSEMBLING THE SATA 2.5" HDD ENCLOSURE

To begin using the DataTale Mobile 2.5" SATA HDD Enclosure Kit, simply

install a 2.5" SATA hard drive in the Enclosure and complete the assembly

steps outlined below:

1. Firmly push the lid down from front to back and open the Enclosure. After

the lid is opened, the PCBA board (Printed Circuit Board) should be

securely in place inside the Enclosure. One package containing the two

HDD screws and two case screws should be attached.

2. Carefully take out the PCBA board from the enclosure. Align the SATA

connector of the hard drive with the PCBA board. Carefully insert the SATA

connector into the slot on the PCBA board until it's firmly connected.