Aussie 6T01U00SS1 사용자 설명서 - 페이지 16

{카테고리_이름} Aussie 6T01U00SS1에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Aussie 6T01U00SS1 20 페이지. Table top grill

Problem

Gas leaking from

LP Gas Cylinder

Gas leaking between

LP Gas Cylinder and regula-

tor connection

Grease fire or excessive

flames above cooking surface

Flashback (Fire in or around

Venturi tubes)

Possible Cause

Mechanical failure due to rust

or mishandling

Improper installation, con-

nection not tight, failure of

seal on LP Gas Cylinder

Too much grease build-up in

Burner section

Clogged or blocked Venturi

tube

Solution

Replace LP Gas Cylinder.

Remove LP Gas Cylinder. Re-install correctly and

tighten. Replace Cylinder if damaged. See "Leak Test"

and "Connecting Regulator to LP Gas Cylinder"

sections.

Turn off Regulator Knob and remove LP Gas Cylinder.

Once fire is out and grill has cooled off, clean residual

food particles and excess grease from inside firebox

area, grease cup, and other surfaces.

If you can safely reach the Regulator Knob, turn it to the

"OFF" position, then remove the LP Gas Cylinder. Once

grill has cooled, clean Burner and Venturi tubes. See

"How to Clean Burners" section.

Emergencies