DATATEC Y.I.C. TECHNOLOGIES EMProbe 설정 매뉴얼 - 페이지 6

{카테고리_이름} DATATEC Y.I.C. TECHNOLOGIES EMProbe에 대한 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DATATEC Y.I.C. TECHNOLOGIES EMProbe 7 페이지.

EMProbe Connections:



RF Connection: connect the SMA side of the RF Cable to the probe held by the

Magician and the N Type side to the



USB Connection: connect the Magician to a PC using the USB cable.

Establish a Connection

After you have connected the Magician to the PC and powered it on, wait at least 30 seconds

for the software to detect it. You will see the EMProbe be detected by the software:

In some cases, the driver required may not be installed automatically. If the EMViewer

software cannot detect the scanner, the driver will need to be installed manually. A copy of the

USB driver can be found on the PC in the following location:

C:\Program Files\YIC Technologies\EMViewer2\drivers\EMProbe

To manually install, copy the EMProbe folder to the desktop. Inside the copied folder, right

click on:

silabser.inf - > Install

You may delete the folder from your desktop once the driver is installed.

Sentinel House, Ancells Business Park, Harvest Crescent, Fleet, Hampshire, GU51 2UZ, UK

spectrum analyzer

(RF Input).