Aussie RAPTOR 12 운영자 사용 설명서 - 페이지 4
{카테고리_이름} Aussie RAPTOR 12에 대한 운영자 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Aussie RAPTOR 12 16 페이지. Electric hydro-blaster
페이지 인쇄
Australian Pump Industries
ACCESSORY INFORMATION
Ensure that all accessories are rated to 7,300 psi (500 bar) before using with the Aussie Raptor.
Suitable accessories available from Australian Pump Industries;
1)
Aussie CTN500-020 (12 LPM version) or CTN500-025 (16 LPM version) 500 bar rated Turbo Master
turbo head. (1/4"M to 1/2" M nipple required to fit to lance.) Also available as a complete kit with lance,
gun, nozzle & nipple to allow quick coupling to hose (CTN500-_ _ _GLK)
2)
Aussie Grit blast Kit
TPS450
Probe
Note: Available
to allow quick coupling to hose (TPS450/_ _ _GLK).
3)
Aussie 500 bar gun, lance & shoulder rest.
RL84
RL800
RL1250
Shoulder rest, 300mm
HIGH PRESSURE WASH DOWN
The Aussie Raptor can be used for any high pressure water blasting application in construction, mining,
ship cleaning, dry docks, graffiti removal or for any other difficult task.
HIGH PRESSURE PISTON PUMPS
Your high pressure Udor pumping system is the heart of your water jetter. The pump has been specially
designed to be used with cold water (max 60ºC) for high pressure wash down applications. Your high
pressure Udor piston pump is designed to move a certain amount of water per revolution by its three solid
ceramic pistons.
High pressure is created once the pump outlet is restricted with a nozzle.
connections, hosing and equipment is rated over and above the maximum operating pressures of the
pump.
Please do not alter any valving on your pump; altering will void all warranty. For any malfunction of the
high pressure pumping system, please contact Australian Pump Industries or the Distributor you purchased
the unit from.
Because of safety/danger hazards with high pressure systems, only use approved high pressure hosing
and components when replacing or repairing your Raptor. For guidance on this, please contact Australian
Pump Industries or the Distributor you purchased the unit from.
Once wash down nozzles have worn, pressure loss will occur. Replacement of nozzles is necessary to
maintain constant and maximum efficiency of your Raptor. Using worn nozzles will reduce unloader valve
service life.
4
500 bar grit blast head, 1/4" F BSP (C4700.18)
580mm, 20mm hose barb
as
a
complete
kit
500 bar spray gun, 1/2" F BSP
500 bar s/s 800mm single lance, 1/2"M
500 bar s/s 1250mm single lance, 1/2"M
Raptor Electric Operator's Manual
(C4604.01)
with
lance,
gun,
nozzle
(MPA30540000)
(MPA30500080)
(MPA30500092)
(MPA30501921)
&
nipple
All high pressure outlet
July 2012