Aussie AS-360P-IP 설치 매뉴얼 - 페이지 5

{카테고리_이름} Aussie AS-360P-IP에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Aussie AS-360P-IP 8 페이지. 3 mega pixel 360 degree panoramic camera

1. Attach the installation sticker to the ceiling/wall. Please check the

arrow direction. The arrow should be kept the same direction with

the Top arrow on the camera case when installing on the wall.

2. Drilling 3 pilot mounting holes and a cable hole according the

circles on the sticker. The diameter of mounting hole is 7mm. Then

hammer the 3 plastic anchors into the mounting holes. The cable

hole should bigger enough to feed the cable though the hole.

3. Feed the external Ethernet and power cable though the cable

hole, and connect the cables to the camera connector. Please

make sure the connecting is firm.

4. Check the arrow direction of the camera, keep it as same as the

arrow of attached sticker. Secure the screws and please make sure

the camera is securely installed.

Ceiling and wall mount

The recommend wall installation height is about 2.5 to 3 meters.

Notice: Please confirm the installation FOV before mount the

camera on the wall, and keep the Top arrow on the camera is

towards the ceiling.

5. Angle modify

- 5 -