DVC BASLER ACE 빠른 설치 매뉴얼 - 페이지 10
{카테고리_이름} DVC BASLER ACE에 대한 빠른 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DVC BASLER ACE 14 페이지.
페이지 인쇄3. The IP configurator window will enter edit mode and will now allow you to enter new IP
values as shown below.
If desired, enter a Device User ID for the camera.
If you want to assign the camera a persistent (fixed) IP address, enter an IP address,
a subnet mask, and a default gateway. Also make sure that the Use Persistent IP
check box is checked. (Before you assign a persistent IP address, you should read
the notes that appear in the note at the end of this procedure.)
If you want the camera to use DHCP address assignment (i.e., to obtain an IP
address from a DHCP server attached to the same network as the camera), make
sure that the Use DHCP check box is checked and that the Use Persistent IP check
box is not checked.
4. When you are finished making changes, click the Write Configuration button. A message
will appear indicating that the camera is restarting its IP configuration cycle as shown
below. When this message disappears the changes to the IP configuration will be in
place and the IP Configurator window will now show the changed settings.
Quick installation Guide V1
DVC
10