DVC 5370 설치, 운영 및 유지보수 매뉴얼 - 페이지 7

{카테고리_이름} DVC 5370에 대한 설치, 운영 및 유지보수 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DVC 5370 16 페이지. Mechanical limit switch with valve and led

3.4. Function setting and button operation

156123 & 156133 Version

Self-tuning function：

While pressing two buttons for about 8 / S, the system will start the auto-tuning position function, the tuning

process takes about 5 minutes. Note When the auto tuning function is activated, the button will automatically fail

until the setting is complete.

1561 version：

Note: This function is suitable for initial use and also for routine maintenance.

Manual operation function:

Triggering the right button will immediately start the solenoid valve (valve position). The LED lights up when the

valve position reaches the target valve position;

Position feedback signal can be output, S1 ... S2 such as DC 24V + (PNP) & 4-20mA analog output signal

Note: The 156133 ASI bus version does not have an independent signal output function, only the bus

communication, in addition to other functions and 156122 version of the same.

3. 5.indicator light instruction

Green LED lights

Green light on,mean valve opened or

closed Note: valve opened and closed

according to the design of actuator and

valve If use Std. valve and

actuator,Green lights on default valve

opened

Note: LED color can be reset as needed

Red light on,mean valve opened or closed

Note: valve opened and closed according

to the design of actuator and valve If use

Std. valve and actuator,blue lights on

06 / 15

Red LED lights

default valve closed