Datatool system 21 사용자 설명서 - 페이지 2
{카테고리_이름} Datatool system 21에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Datatool system 21 12 페이지.
페이지 인쇄
INITIAL OPERATION - STANDARD MODE
When you collect your motorcycle, the Datatool System will be armed in STANDARD MODE.
In this mode the system arms automatically, 30 seconds after you switch off the ignition.
Before moving or starting your motorcycle, You will need to DISARM the system.
TO DISARM THE SYSTEM
The system will arm again automatically after
30 seconds if the ignition isn't turned ON.
TO ARM THE SYSTEM
The system will arm automatically 30 seconds after the ignition is switched OFF,
or you can arm the system manually before this time.
FULL ALARM REACTION
Once triggered, the audible alarm will sound and the indicators will flash for 30 seconds,
the alarm will then switch off and reset automatically (See Diagnostic Mode).
To switch OFF the alarm manually, use the transmitter.
Page 1