Datatronics DA-5500 Series 소유자 매뉴얼 - 페이지 3

{카테고리_이름} Datatronics DA-5500 Series에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Datatronics DA-5500 Series 10 페이지. Automatic disc duplicator
Datatronics DA-5500 Series에 대해서도 마찬가지입니다: 소유자 매뉴얼 (9 페이지), 소유자 매뉴얼 (13 페이지)

페이지 인쇄

DA5500 Series Automatic Disc Duplicator User's Guide V 1.4E

1 Introduction

Thank you for purchasing DA-5500 series automatic disc duplicator.

The DA-5500 series is a stand-alone unattended duplicator that requires no

computer connection during operation. It consists of robotic mechanism that can

automatically move discs from an input bin to the burner, then to the output bin

after duplication is complete. If any disc does not pass, the robotic arm will pick it up

and drop it to the reject bin. Low cost, high performance, the DA-5500 series is the

best choice to fulfill your duplication requirements.

Especially designed for office applications, the DA-5500 series is based upon a

controller with LCD displays, which makes all steps easy to follow during duplication.

Should you encounter any difficulty, please refer to "Trouble Shooting" or contact

your dealer directly.

2 Reminders

We strongly suggest you to locate your DA-5500 series in a dust free environment

in order to eliminate contamination of discs that cause duplication rejects. Please

also allow enough space around the unit to make sure it can work properly.

For media selection, we recommend you to choose the branded discs, i.e. Verbatim,

TDK, Sony, Samsung, Ricoh, Maxell, etc., and make sure to reserve some discs for

possible troubleshooting tool in the future. For your own safety and the drive

protection as well, do not use any damaged disc in order to prevent any accident.

Under any circumstance, we do not encourage users duplicate copy protected

materials.

3 Main Functions

3.1 Copy

1. COPY

Press "Enter"

1. COPY

READ MASTER DISC

[COPY]

SPEED MAX

Press "Enter"

[SPEED MAX]

COPY NO. -- > 121

Press "Enter"

Always make sure that the Master disc is

inside the reader, then place blank discs into

the Input bin,"

Press ▲ ▼ to set the speed

Press ▲ to set the numbers

Press ▼ to switch the places