Datatronics DA-5500 Series 소유자 매뉴얼 - 페이지 7
{카테고리_이름} Datatronics DA-5500 Series에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Datatronics DA-5500 Series 9 페이지. Automatic disc duplicator
Datatronics DA-5500 Series에 대해서도 마찬가지입니다: 소유자 매뉴얼 (10 페이지), 소유자 매뉴얼 (13 페이지)
페이지 인쇄Datatronics Series Automatic Disc Duplicator User's Guide v2.1
4.4 Loading Discs
Wear lint free gloves whenever you handle discs to avoid fingerprints that can affect
duplication. Make sure the first 5 discs have to be leveled while inserted. You can add discs to
the input bin while the system is running. (Capacity: 100pcs)
4.5 Unloading Accepted Discs
It is the responsibility of the operator to keep passed discs away from "rejected" discs.
4.6 Unloading Rejected Discs
It is the responsibility of the operator to keep rejected discs away from accepted discs and
master disc.
5. Maintenance
If you need to clean the outside cabinet and plastic panels, always turn off the AC power
switch first and make sure your masters and blanks are covered. Please use a clean lint free
cloth moistened with warm water and dry the unit immediately with a clean lint free cloth.
6. Trouble Shooting
6.1 Frequently asked questions
What is the best speed to duplicate audio?
We recommend 16X or under. If you duplicate audio in max speed, there is a great possibility
of failure.
Why is the failure rate so high?
Always make sure that master and blank discs are in good condition. If the failure rate is still
high, please lower the write speed.
What should I do if disc jams?
Don't panic! Just carefully remove the disc from loader or tray and reload the master and blank
discs, then press key to start the job. In order to prevent such problem from happening again,
please choose quality discs between 119.85mm ~ 120.30 mm and follow the instruction of 4.4.
Why disc jams?
Sometimes when discs are sticky, which is commonly seen on the plastic wrapped bulk discs,
it is more difficult to remove disc from each other, therefore, we suggest you loosen discs
completely before loading.
5