Aussie Pumps MINE BOSS SCUD 351 운영자 사용 설명서 - 페이지 16
{카테고리_이름} Aussie Pumps MINE BOSS SCUD 351에 대한 운영자 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Aussie Pumps MINE BOSS SCUD 351 16 페이지.
Aussie Pumps MINE BOSS SCUD 351에 대해서도 마찬가지입니다: 운영자 사용 설명서 (16 페이지)
페이지 인쇄
WARNINGS
OVERSPEEDING
Do not operate machine at over 3200 rpm
(engine speed).
Over speeding can cause
serious pump damage.
EXCESSIVE BYPASS
Do not run on excessive by-pass.
machine off within five minutes of ceasing
operation as excessive by-pass can cause heat
build up in pump and subsequent damage.
Excessive bypass running voids warranty.
PRESSURE CLEANER DAILY CHECKLIST
Check pump oil level
Check engine & gearbox oil level
Check nozzle for wear
Check all high pressure components for leaks:
gun/lance
HP hose
all fittings
Check water filter and clean regularly
Check unloader, safety valve and thermal
dump for leaks
BEWARE
of abrasions on hose and replace if
damaged ...
STAY SAFE
Aussie HP Accessories ... making light work of cleaning chores
WEAR PROTECTIVE GOGGLES & CLOTHING!
HIGH PRESSURE SETTING
The high pressure pump is factory set to operate
at its rated pressure.
Tampering with the pressure regulator will void
warranty and can be DANGEROUS.
CHECK NOZZLE MONTHLY
Switch
If pressure drops off check nozzle for wear.
Nozzles should be replaced on a regular basis
(every month for machines in regular use, every
three months for machines used intermittently).
Using the machine with the incorrect nozzle size
or worn nozzle will void warranty and can be
DANGEROUS to the operator.
THREE MONTHLY REGULAR SERVICE
All professional machines need to be thoroughly
serviced every three months. Use an approved and
qualified Aussie service agent. The service should
include
recommendations (see separate Engine Manual)
and the following:
Change pump oil
Check filter for foreign debris
Check unloader, safety valve and thermal dump
for leaks
Check all HP components for leaks: Gun/lance,
HP hose and all fittings
Replace nozzles
Check gearbox to engine key for wear, and
replace as required. NB Damage generated by
worn keys is not covered by warranty.
Australian Pump Industries Pty Ltd
7 Gladstone Road, Castle Hill NSW 2154
Ph: (02) 8865 3500 Fax: (02) 9894 4240
aussiepumps.com.au [email protected]
DO NOT ADJUST.
the
engine
manufacturer's