Aussie Pumps D1310P4 운영 및 유지 관리 지침 - 페이지 20
{카테고리_이름} Aussie Pumps D1310P4에 대한 운영 및 유지 관리 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Aussie Pumps D1310P4 20 페이지. Hot water pressure washer
페이지 인쇄IMPORTANT INFORMATION
ROUTINE CHECK LIST - IMPORTANT
- DAILY:
1.
Check pump oil level. If oil is milky contact your Aussie Eco-Clean Distributor for service.
2.
Check all high pressure components for leaks:
a) gun/lance;
3.
Check power supply cable and plug for damage.
4.
Check water inlet filter - clean if necessary.
- MONTHLY:
1.
Check high pressure nozzle for wear. If pressure has dropped off, replace nozzle. If you machine is
used regularly the nozzle may need replacing monthly to maintain performance.
2.
Clean detergent suction filter.
3.
Change lance nozzle tip.
4.
Change oil
5.
Check fuel filter
- 6 MONTHLY/250 HOURS:
- ANNUALLY/ 500 HOURS:
HIGH PRESSURE SETTING - The high pressure pump is factory set and
Tampering with the pressure regulator will void warranty and can be DANGEROUS
b) high pressure hose;
- Contact your Aussie Eco-Clean Distributor for recommended service.
- Contact your Aussie Eco-Clean Distributor for recommended service.
sealed to operate at its rated pressure. DO NOT ADJUST.
Look after your machine . . .
and it will look after you!
AND REMEMBER . . .
Always wear protective clothing,
including boots and goggles!
RELIABLE PRODUCTS . . . RELIABLE PEOPLE
AUSTRALIAN PUMP
Australian Pump Industries Pty Ltd ACN 061 619 234 ABN 79 061 619 234
7 Gladstone Rd, Castle Hill NSW 2154
Ph 02 8865 3500 Fx 02 9894 4240 www.aussiepumps.com.au
c) all fittings.
WARNING
PO Box 6164, BHBC NSW 2153