AUSSIE TONNEAU ATB01138 피팅 지침 - 페이지 2

{카테고리_이름} AUSSIE TONNEAU ATB01138에 대한 피팅 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. AUSSIE TONNEAU ATB01138 3 페이지. Cover for proton jumbuck dual cab 2003 – 2011

7. To fit the rope buttons, start with the tailgate and line up vertically each button to each ring

grip then measure 145mm down from the inside edge and drill and rivet each button. See

Figure 3. For the side panels, follow the same procedure as with the tailgate, drill and rivet

buttons alternating from one side to other side of the tub. The front rope button on each side

should be 50mm forward from the ring grip so the ring is on an angle pointing forward.

8. Attach the tonneau cover to all rope buttons.

Figure 1

(Placement of

aluminum rope track.

Ensure channel is

above the lip's top

edge.)

(Placement of side

sealing angles.)

Figure 2

Placement of Bar

Brackets.

Figure 3

(Placement of Rope

Button)