Datavideo DAC-100 시작하기 - 페이지 9

{카테고리_이름} Datavideo DAC-100에 대한 시작하기을 온라인으로 검색하거나 PDF를 다운로드하세요. Datavideo DAC-100 13 페이지. Important note to make dac-2/dac-100 work with pinnacle dv500
Datavideo DAC-100에 대해서도 마찬가지입니다: 보충 설명서 (13 페이지), 시작하기 (15 페이지)

페이지 인쇄
Datavideo DAC-100 시작하기
C. Diagrams of typical cable connections
Make sure your VCR or Analog source is connected to the front inputs of the DAC-100 (LED's
are on the front of the DAC-100).
A 6-pin FireWire cable can be connected to the front or rear of the DAC-100. The
opposite end should be connected to your 1394/connector on your computer.
If you would like to monitor your video, a composite video cable can be used to connect a
video monitor. Connect a composite RCA cable from the rear of the DAC-100 and connect the
opposite end to the input of your monitor.
Note: S-video cables only carry a video signal, so you will need to connect your RCA audio
cables to the converter to capture sound.