Datavideo DAC-15 사용자 설명서 - 페이지 11

{카테고리_이름} Datavideo DAC-15에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Datavideo DAC-15 14 페이지. Bidirectional dv/analog converter

DV NLE System with Analog VCR SVHS or VHS

Setting Up

Step 1. Select the desired mode by setting the dip switches. Reboot the DAC15 after changing

the dip switches.

Step 2. Install the equipment as shown in installation diagrams.

Step 3. Ensure that all equipment is turned on.

Step 4. Select the video source. If the video source is analog, select the desired audio sampling rate (12 Bit or 16

Bit).

Step 5. Playback the source video.

Step 6. If needed, calibrate the playback video and audio output levels.

Step 7. To generate an analog color bar output, under the DV mode, press and hold the "16 BIT" key. The Color

Bar will output from YUV, S(Y/C) and Composite video sockets at the same time. Press on the "16 BIT" key again

to return to normal operation.