Datavideo DAC-2 설치 매뉴얼 - 페이지 7

{카테고리_이름} Datavideo DAC-2에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Datavideo DAC-2 13 페이지. Important note to make dac-2/dac-100 work with pinnacle dv500
Datavideo DAC-2에 대해서도 마찬가지입니다: 빠른 설정 매뉴얼 (6 페이지), 보충 설명서 (5 페이지), 보충 설명서 (13 페이지)

페이지 인쇄

FRONT PANEL CONTROL

Select DV input:

(Decode Mode)

Press on this button

to Reset the system

and select DV input

DV input indicator

"On" as DV input

Select Analog Video input:

(Encode mode):

1. To select CV/S-Video or

YUV video input source

2. Hold down this button

and press on the "DV"

button to enable CV output

Color Bar Pattern video.

Press on the "DV" button

back to normal video out

Y.U.V. TO DV CONVERTER DAC-2

Gen-Lock (C-sync) input:

1). Typical YUV input

2). YUV + C-Sync input

There are three functions for this button (Please see Page

7 for more detailed instructions):

(NTSC MODELS ONLY)

Decode Mode: (DV input)

Mode 1 Default is the Windows 2000 mode

(This mode is primarily for Windows 2000 users.)

Please Note: The DAC-2 will always default to this mode on power up.

Mode 2 is a secondary mode that works well with MACs

(running OS X) and windows

Mode 3 is a general setting for other DV devices (Cameras,

etc.)

Encode Mode: (DV output)

Press (Do Not Hold) to select 12-bit/32KHz or

16-bit/48KHz DV audio Encode mode

The 32KHz sampling rates is most commonly used for

DV camcorders and 48KHz is commonly used for

DVD as well as DV capture cards

Note: The DAC-2 will auto detect your audio decoding (exporting back

to tape) settings of your settings of your non-linear editing software.

C-SYNC

V(R-Y)

U(B-Y)

Y: U:V Input