Datavideo DAC-91 사용 설명서 - 페이지 3

{카테고리_이름} Datavideo DAC-91에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Datavideo DAC-91 17 페이지. Sdi audio embedder
Datavideo DAC-91에 대해서도 마찬가지입니다: 사용 설명서 (20 페이지)

Datavideo DAC-91 사용 설명서

FCC Compliance Statement

This device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions:
(1)
This device may not cause harmful interference, and
(2)
This device must accept any interference received, including
interference that may cause undesired operation.

Warnings and Precautions

1.
Read all of these warnings and save them for later
reference.
2.
Follow all warnings and instructions marked on this unit.
3.
Unplug this unit from the wall outlet before cleaning. Do not use liquid
or aerosol cleaners. Use a damp cloth for cleaning.
4.
Do not use this unit in or near water.
5.
Do not place this unit on an unstable cart, stand, or table. The unit
may fall, causing serious damage.
6.
Slots and openings on the cabinet top, back, and bottom are provided
for ventilation. To ensure safe and reliable operation of this unit, and
to protect it from overheating, do not block or cover these openings.
Do not place this unit on a bed, sofa, rug, or similar surface, as the
ventilation openings on the bottom of the cabinet will be blocked. This
unit should never be placed near or over a heat register or radiator.
This unit should not be placed in a built-in installation unless proper
ventilation is provided.
7.
This product should only be operated from the type of power source
indicated on the marking label of the AC adapter. If you are not sure of
the type of power available, consult your Datavideo dealer or your
local power company.
8.
Do not allow anything to rest on the power cord. Do not locate this
unit where the power cord will be walked on, rolled over, or otherwise
stressed.
9.
If an extension cord must be used with this unit, make sure that the
total of the ampere ratings on the products plugged into the extension
cord do not exceed the extension cord's rating.
10.
Make sure that the total amperes of all the units that are plugged into
a single wall outlet do not exceed 15 amperes.
2