Dvico TViX PVR R-2210 빠른 매뉴얼 - 페이지 15

{카테고리_이름} Dvico TViX PVR R-2210에 대한 빠른 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dvico TViX PVR R-2210 19 페이지. Tvix pvr r-2200 series ultimate pvr with hd digital jukebox

페이지 인쇄

This section indicates the A/V (Video or Audio) settings. Press SETUP button on the remote controller and

select the A/V.

This screen allows you to adjust the A/V settings of your TViX to your personal taste. Select 'Up Folder'

menu to exit this SETUP.

Analog Audio output : Select this when you connect the audio with a stereo RCA cable (the Red and

White cable)

Digital Audio output: Select this when you connect the audio with an optical cable for digital audio

connection to the Decoder/Amplifier.

Video Output : Select this when you connect the video through a composite or HDMI cable. With

HDMI setting, you can select the output resolution among 720p 50hz/60hz, 1080i 50hz/60hz. Setting

it to 1080i will work on all HD grade TVs.

Video Aspect Ratio : 4:3 Letter Box / 4:3 Pan & Scan for ordinary TVs / 16:9 for Wide TVs like HDTV

or Plasma TV.

If the ratio of the TV is 4:3, select the 4:3 letter box or 4:3 Pan & Scan. If the ratio is 16:9, select 16:9.

* The 4:3 Letter box can show the original ratio of the multimedia file in 16:9.

* The 4:3 Pan & Scan will adjust the image of the 16:9 multimedia file to the 4:3 of the TV screen by

scaling the image. (Currently, not support this mode)

* 16:9 can adjust any ratio of the multimedia file to the TV screen with the original image.

Video Auto Switch : is used when the video out is changed according to the NTSC or PAL format.

Apply Video Output : press 'Apply Video output' to save current Video output mode.

Ultimate PVR with HD Digital Jukebox