AussieCarHoists High-Lift Equipment YL-350W 설치 및 운영 매뉴얼 - 페이지 15
{카테고리_이름} AussieCarHoists High-Lift Equipment YL-350W에 대한 설치 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AussieCarHoists High-Lift Equipment YL-350W 20 페이지. Two post clear floor/base plate car hoist
페이지 인쇄
Install The Lift Arms
Install Inner arm
1. Place the appropriate lift arm assembly in the lift heads.
2. Install the lift head pins into the lift head and through the holes in the arm assembly.
3. Each arm restraint gear can be oriented in a left or right configuration on the arms. Each arm and
arm restraint gear must be positioned in the proper location in the lift head
4. Place each gear ring against the lift head pin and align the holes in the gear ring with the
threaded holes in the arm ears. Ensure that the teeth on the gear ring mesh smoothly with the teeth
on the gears of the lift head
5. Verify the operation of the arm restraints by pulling up on of the arm restraint pin. Pivot the arms
back and forth and test the operation of the arm restraint pin in various positions
6. Ensure that the arms do not move when a force of approximately 100 pounds or less is applied
laterally to the fully extended arms.