Dvico TVIX T430 사용자 설명서 - 페이지 9

{카테고리_이름} Dvico TVIX T430에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dvico TVIX T430 18 페이지. Tvix hd tuner
Dvico TVIX T430에 대해서도 마찬가지입니다: 사용자 설명서 (16 페이지), 사용자 설명서 (16 페이지)

페이지 인쇄

※ Checking Digital signal Reception

① Press the INFO button on the remote control.

② The Signal strength meter will appear on the left-bottom.

③ If signal strength meter indicates less than 14.9db, adjust your antenna to increase the signal

strength. Continue to adjust the antenna until you find the best position with the strongest signal.

2.1.2 Channel switching

Press CH +/- or ▲ ▼ button to change the TV channels.

You can also enter the channel number by using the numeric keypad on the

remote and the channel will change after a few seconds.

2.2

DTV Recording

2.2.1 Instant recording

This function records the current displayed channel.

• Select the desired channel to record while watching and then press the REC button to record.

You cannot change the channel while recording.

• Press the STOP(■) to stop recording, or, when the recording duration is reached, the TViX will stop

recording.

• The recorded file is stored to the hard disk of the TViX in a folder named DTV_REC

The file is saved with a name of the form "YY-MM-DD day station named AM/PM HH:MM.tp"

The hard disk must be used under the NTFS file system. If the FAT32 file system is used, an error message

appears.

• Each press of the REC button changes the recording duration in the sequence shown below.

Free Space->30min->45min->60->75->90->105->120->150->180->210->240. When recording, you can see

red-round OSD on the left-top of the screen.

You can also add recording time by pressing the REC button during Instant Record.