ADE M703600 운영 매뉴얼 - 페이지 6
{카테고리_이름} ADE M703600에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ADE M703600 12 페이지. Electronic lifter scales
페이지 인쇄
Zero
Press
for 1 second to zero
scale.
"ZERO" shows and weight turns
zero.
If weight is tared, or not stable, or held, zero is not
allowed.
If weight is over the Manual-Zero range, zero is not
allowed.
Settings
Press
and
buttons for 1 second, to enter Setting Mode.
Press
To enter Auto-Off option; and press
to change Auto-Off option.
Auto-Off can be set to 0 (disabled), 5 (5min), 15
(15min), 30 (30min), 60 (60min).
Press
to
press
to change Auto-Zero option.
Auto-Zero can be set to 0 (disabled), by 2 (2% of full
cap.), 4 (4%of full cap.), 10 (10% of full cap.), 20
(20%of full cap.), 50 (50% of full cap.)
Press
to
press
to change Manually entered-zero option.
Manual-Zero can also be set to 0 (disabled), 2 (2%of
full cap.), 4 (4%of full cap.), 10 (10%of full cap.), 20
(20%of full cap.), 50 (50% of full cap.).
Press
to enter backlight option; and press
change backlight option.
Backlight can be set to off (disabled), 5 (5sec), 15
(15sec), 30 (30sec), 60 (60sec), on (never).
Once backlight is set to 5, 15, 30, or 60, ff it turns off
corresponding to the seconds after stability has been
reached.
When Backlight is set to off, it is completely disabled.
6
simultaneously, and hold the two
enter
Auto-Zero
manually
enter
Zero
option;
and
option;
and
to
M703600+M703600-01-210817-Rev008-UM-en