DVIGear DVI-7520-Rx 사용자 설명서 - 페이지 11

{카테고리_이름} DVIGear DVI-7520-Rx에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DVIGear DVI-7520-Rx 14 페이지. Hdmi hdbaset extender set, 70m, 100m

sends 48 VDC power over the CAT-X cable to the receiver unit, which acts as

a PD (Powered Device). This feature eliminates the need for an external power

supply at the receiver. To maintain compatibility and interoperability with other

POH system components, these products use a sophisticated handshake

feature that prevents power exchange with non-standard (incompatible) devices.

For POH operation, connect the supplied AC Power Adapter to the 12 VDC

Power Input on the transmitter unit and then to a working AC power source.

Once the transmitter unit detects the POH compatible receiver unit, it will

provide power over the CAT-X cable. If non-POH operation is desired, simply

connect the optional AC Power Adapter to the 12 VDC Power Input on the

receiver unit. In this case, the transmitter unit no longer supplies power to the

receiver unit.

Note: This product utilizes a locking DC power connector to prevent the power cable from

disengaging. Insert the DC plug into the power input jack on the rear panel, then gently rotate

the locking collar in the clockwise direction until it is secure. To remove the power connection,

simply unscrew the locking collar counter-clockwise and then extract the power cable.

4.3

Mounting Hardware

Above Mount

Below Mount

-9-