DVIGear DVI-7520-Rx 사용자 설명서 - 페이지 7

{카테고리_이름} DVIGear DVI-7520-Rx에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DVIGear DVI-7520-Rx 14 페이지. Hdmi hdbaset extender set, 70m, 100m

3.0

PACKAGE CONTENTS

Before attempting to use this unit, please check the packaging and make certain

the following items are contained in the shipping carton:

• 1x DVI-7520-TX or DVI-7525-TX HDMI HDBaseT Transmitter

• 1x DVI-7520-RX or DVI-7525-RX HDMI HDBaseT Receiver

• 1x User Guide

• 1x External AC Power Adapter (+12 VDC)

• 1x IR Transmitter

• 1x IR Receiver

• 2x 3-pin RS-232 Phoenix Connectors

• 4x Mounting Brackets with Screws

• 2x HDMI Jack Screws

Note: Please retain the original packing material in case you need to return the unit. If you

find any items are missing, contact your reseller or DVIGear immediately. Please have the

Model Number, Serial Number, and Invoice Number available for reference when you call.

4.0

Please study the images below and become familiar with the signal inputs,

outputs, and the location of the power connector.

1 2 3 4

1 HDCP LED: ON indicates HDCP encrypted signal is present, blinking

indicates non-encrypted signal, OFF indicates no signal.

2 Link LED: monitors the link status between the HDBaseT transmitter and

receiver. When a proper connection is established, the LEDs on both Tx

and Rx are ON, otherwise both LEDs are OFF.

3 Status LED: monitors internal HDBaseT activity, blinking when normal.

4 Power LED: ON when an active power source is applied.

Note: The configuration of the front panel LEDs on the DVI-7520 and DVI-7525 are identical.

-5-