Datavideo TLM-170G 사용 설명서 - 페이지 13

{카테고리_이름} Datavideo TLM-170G에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Datavideo TLM-170G 16 페이지. 17.3" 3g-sdi tft lcd monitor
Datavideo TLM-170G에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (13 페이지), 빠른 시작 매뉴얼 (16 페이지)

페이지 인쇄

Remote Setup using a direction computer connection

The TLM-170G can be remotely set up using a computer web browser and an Ethernet crossover

cable. No existing computer network is used. The Ethernet crossover cable is connected to the

TLM-170G monitor and the computer/laptop being used.

1. Use an Ethernet RJ-45 crossover cable to connect the TLM-170G directly to the computer

being used.

2. Power on the TLM-170G monitor and press the MENU button to display the OSD menu.

3. Using the Up / Down buttons highlight SETUP NETWORK and press ENTER.

4. Set the menu option DHCP to ''OFF'' and press ENTER.

5. Then enter into the TLM-170G ...

6. Now open the Network and Sharing Center window on the Windows computer. Open the

Local Area Network Properties window and make a note of any displayed IP address or

settings so you can return the computer back to its original settings later if necessary.

7. Now change the Computer's TCP/IP property settings as shown below.

Select 'Use the following IP Address' radio button.

Then enter into the computer ...

8. Now save and close any open network related windows on the computer.

9. From the computer desktop open a web browser such as Internet Explorer or Google

Chrome.

10. Delete the contents of the address bar at the top of the browser window and enter the IP

address of the TLM-170G which should be 192.168.0.210 if you are following the example

here.

11. When you enter the IP address in the web browser, the TLM-170G's remote settings

interface should be displayed in the browser window.

IP Address: 192.168.0.210

Subnet Mask: 255.255.255.0

Gateway: 192.168.0.1

IP Address: 192.168.0.205

Subnet Mask: 255.255.255.0

Gateway: 192.168.0.1