Datavideo TLM-170L 사용 설명서 - 페이지 11
{카테고리_이름} Datavideo TLM-170L에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Datavideo TLM-170L 17 페이지. 17.3” 3g-sdi tft lcd monitor
Datavideo TLM-170L에 대해서도 마찬가지입니다: 사용 설명서 (17 페이지)
페이지 인쇄
From time to time Datavideo may release new firmware to either add new features or to fix
reported bugs in the current TLM-170L firmware. Customers can update the firmware themselves
if they wish or they can contact their local dealer or reseller for assistance should they prefer this
method.
This page describes the firmware update process and it should take approximately 15 minutes
total time to complete.
As well as a working TLM-170L you will need:
The latest firmware update for the TLM-170L monitor.
This firmware file can be obtained from your local Datavideo office or dealer.
USB 2.0 pen drive 128MB or larger with a USB A connector.
Once started the update process should not be interrupted in any way as this could result in a
non-responsive unit.
How to update the firmware
1. Unzip / extract the supplied zipped archive or rar folder.
2. Wipe the contents of the USB 2.0 pen drive so it is empty.
3. Transfer / copy the unzipped / extracted file to the USB 2.0 pen drive; make sure the file name
is renamed to MSTFLASH.bin.
4. Plug the USB 2.0 pen drive into the USB 2.0 port labelled MAINTENANCE on the back of the
monitor.
5. Reboot TLM-170L and the update will be automatically in progress.
6. The TLM-170L Monitor will reboot itself at the end of the process.
4.
Firmware update procedure
11