Datavideo TLM-170PM 사용 설명서 - 페이지 11

{카테고리_이름} Datavideo TLM-170PM에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Datavideo TLM-170PM 20 페이지. 17.3” full hd lcd monitor

페이지 인쇄
Datavideo TLM-170PM 사용 설명서
COLOR ADJUST
You can choose:
6500
9300
USER COLOR
EXIT
SCAN SETTING
You can choose:
UNDER SCAN
OVER SCAN
INFORMATION
Display:
H. FREQUENCY
V. FREQUENCY
RESOLUTION
This mode will display the video resolution.
PIP SETTING
You can choose:
PIP
EXIT
Main/Background source is chosen on the front panel first before entering the PIP menu.
PIP window must be an analogue source if Main source is a digital source, or vice versa.
It is not possible to use analogue inputs for both PIP window and Main source.
It is not possible to use digital inputs for both PIP window and Main source.
Examples
If main source = HD-SDI [digital] then PIP window choice = YUV or Composite [analogue]
If main source = HDMI
If main source = YUV
If main source = CV1
LANGUAGE
You can choose:
English
Español
Deutsch
Español
Italiano
Dutch
Português
EXIT
SETUP MENU
You can choose:
OSD TIMEOUT
EXIT
RED
GREEN
BLUE
full image
cropped image
NTSC / PAL / SECAM
ON / OFF
SOURCE
POSITION
SIZE
SWAP
[digital] then PIP window choice = YUV or Composite [analogue]
[analogue] then PIP window choice = SDI or HDMI [digital]
[analogue] then PIP window choice = SDI or HDMI [digital]
[default]
5~120 sec
11
0~100
0~100
0~100
*see below
LF-TOP / RT-TOP / RT-BOT / LF-BOT
LARGE / SMALL / MID
swap PIP source and Main source