Datavideo TLM-404H 빠른 시작 매뉴얼 - 페이지 2
{카테고리_이름} Datavideo TLM-404H에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Datavideo TLM-404H 3 페이지. High quality tft lcd monitors
Datavideo TLM-404H에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (3 페이지)
페이지 인쇄
AUX INPUT: D Sub 9 pin connector on the rear panel. It
provides an external video input with input select
interface and power supply. It reserve for the external
converts such for SDI or DV input adaptor.
Pin 1, 6
Pin 5, 8, 9
Pin 4
Pin 7
AUX INPUT
DC 12 Volt, 0.25 Amp Output
Ground
External Composite Video
Input: 1.0 Vp-p 75 Ohm
Switch Input TTL Level,
External Video Input = +5v
TALLY INPUT: D Sub 15 pin connector on the rear panel. It
works by closing contacts between a ground pin and the
corresponding LED pin as following pin out table. Do not give
power to the pins.
Tally color
Monitor
Monitor A
Monitor B
Monitor C
Monitor D
Pin 4, 9 and 14 are Common Ground
TALLY INPUT
Green
Red
Yellow
Pin 1
Pin 2
Pin 3
Pin 6
Pin 7
Pin 8
Pin 11
Pin 12
Pin 13
Pin 5
Pin 10
Pin 15