Datavideo TLM-404H 빠른 시작 매뉴얼 - 페이지 2
{카테고리_이름} Datavideo TLM-404H에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Datavideo TLM-404H 3 페이지. High quality tft lcd monitors
Datavideo TLM-404H에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (3 페이지)
페이지 인쇄
AUX INPUT: D Sub 9 pin connector on the rear panel.
This provides an external video input with input select
interface and power supply. It is reserved for future use
with an external connector such as an SDI or DV input
adaptor.
Pin 1, 6
Pin 5, 8, 9
Pin 4
Pin 7
TALLY INPUT: D Sub 15 pin connector on the rear panel. It
works by closing contacts between a ground pin and the
corresponding LED pin as shown in the following pin out table.
Do not give power to the pins as the unit will supply power.
AUX INPUT
DC 12 Volt, 0.25 Amp Output
Ground
External Composite Video
Input: 1.0 Vp-p 75 Ohm
Switch Input TTL Level,
External Video Input = +5v
TALLY INPUT
Tally color
Green
Red
Monitor
Monitor A
Pin 1
Pin 2
Monitor B
Pin 6
Pin 7
Monitor C
Pin 11
Pin 12
Monitor D
Pin 5
Pin 10
Pin 4, 9 and 14 are Common Ground
Yellow
Pin 3
Pin 8
Pin 13
Pin 15