Datavideo TLM-433 사용 설명서 - 페이지 9

{카테고리_이름} Datavideo TLM-433에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Datavideo TLM-433 11 페이지. 3 x 4.3” tft lcd monitors

Brightness / Contrast / Saturation - Each monitor can be individually adjusted for brightness,

contrast and colour saturation. The settings are all done in a similar way.

Select the adjustment that you want to make and press the ENTER button. The adjustment bar will

appear on the screen, and can be adjusted using the UP / DOWN buttons. Once set as required press

the ENTER button.

Reset / Default - This can be used to return the monitor to the factory default settings.

Tally Light Socket Wiring

The Tally Light Socket controls the tally lights which are above each monitor.

The Tally Lights are bi-colour - RED indicates the source is LIVE (On-Air) AMBER indicates the source

is (CUED UP).

The socket works on simple contact closure between pins, the following table shows the pins for each

monitor.

Monitor A

Pins 1 - 4 = RED

Pins 3 - 4 = AMBER

Monitor B

Pins 6 - 9 = RED

Pins 8 - 9 = AMBER

Monitor C

Pins 11 - 14 = RED

Pins 13 -14 = AMBER