Datavideo RMC-180 사용 설명서 - 페이지 12
{카테고리_이름} Datavideo RMC-180에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Datavideo RMC-180 16 페이지. Ptz camera control unit
Datavideo RMC-180에 대해서도 마찬가지입니다: 사용 설명서 (13 페이지), 사용 설명서 (16 페이지), 사용 설명서 (19 페이지)
페이지 인쇄
From time to time, Datavideo may release new firmware to either add new features or to fix reported bugs in
the current RMC-180 firmware. Customers can update the firmware themselves if they wish or they can
contact their local dealer or reseller for assistance should they prefer this method.
This page describes the firmware update process and it should take approximately 30 minutes total time
to complete.
Once started, the update process should not be interrupted in any way as this could result in a non-
responsive unit.
Requirement
Latest firmware update files (bootloader firmware and application firmware)
A USB A to USB A cable not longer than 2 meters
A Windows PC with USB 2.0 ports
1. Power off the RMC-180 and connect the USB A cable between the USB firmware upgrade port
on the RMC-180 rear panel and a USB port on the computer
2. Press and hold the buttons indicated with
3. Another person switches on the RMC-180 device while one person presses and holds the buttons
indicated with
Firmware Upgrade Procedure
at the same time
12