Datavideo RMC-180 사용 설명서 - 페이지 8
{카테고리_이름} Datavideo RMC-180에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Datavideo RMC-180 16 페이지. Ptz camera control unit
Datavideo RMC-180에 대해서도 마찬가지입니다: 사용 설명서 (13 페이지), 사용 설명서 (16 페이지), 사용 설명서 (19 페이지)
페이지 인쇄
Connections and Controls
Rear Panel - Connections
Firmware Upgrade
USB type A port, for connection to a computer during the firmware
upgrade process.
RJ45 ports to connect cameras A, B, C & D
Four RJ-45 ports are provided on the RMC-180 rear to connect
each PTZ camera.
NB: Max cable length to camera is 300 m.
Tally Input
The RMC-180 has the ability to receive tally signals from
Datavideo Switchers such as the HS-2000 or HS-2200. Using the
video switcher's tally output signals, the RMC-180 can turn on an
LED on the keyboard, giving the camera operator an indication
which camera is currently live at the switcher.
DC In Socket
Connect the supplied 12V 0.5A PSU to this socket. The
connection can be secured by screwing the outer fastening ring of
the DC In plug to the socket. The connection is centre positive.
Power On/Off Switch
Switches the unit On / Off.
Grounding Terminal
When connecting this unit to any other component, make sure
that it is properly grounded by connecting this terminal to an
appropriate point. When connecting, use the socket and be sure
2
to use wire with a cross-sectional area of at least 1.0 mm
.
8