ADE Molly KE 923 사용 설명서 - 페이지 2

{카테고리_이름} ADE Molly KE 923에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ADE Molly KE 923 4 페이지.

Thank you for purchasing an ADE digital scale. Please read this instruction manual carefully

before first use. Keep these instructions for future use.

Initial Setup and Battery Replacement

• This scale operates on one CR2032 battery (included).

• To activate the batteries for initial use: open the battery cover on the

bottom of the scale and remove the safety strip. Ensure the correct

polarity of the batteries

(+/-).

• To replace the batteries: open the battery cover and slide the batteries

down until they can be easily removed. Be careful not to bend the

contact. Insert the new battery (1 x CR2032) and close the battery cover.

Powering On/Off

•

Place the scale on a flat surface.

•

Turn on the scale by lightly touching the sensor-touch ON/OFF button.

•

Scale will be ready for use when Og or O.Olb/ol is displayed on the screen.

•

This scale is equipped with an auto-off feature to conserve battery power. The unit

will turn off automatically after being idle for 2 minutes.

•

Turn the scale off manually by lightly touching and holding the ON/OFF button.

Weight and Volume Measurement

•

Press the kg/lb button to change the desired unit of measure

(kg/g= kilogram/gram to Ib/oz= pound/ounce)

Tare Function

•

Place a bowl on the scale and press the TARE button to set the scale to 0

•

Weigh your first ingredient

•

Press TARE button again to reset to 0, then add and weigh your next ingredient

•

Repeat for additional ingredients

•

This process can be repeated until the max. capacity of the scale has been reached

•

The display will show a negative number after the bowl is removed from the scale

Care Instructions

• Clean the outside of the scale with a slightly damp cloth, do not immerse.

• Avoid contact with citric acid, solvents and abrasive cleaning agents.