AUSTHEAT AHT860 사용 설명서 - 페이지 3
{카테고리_이름} AUSTHEAT AHT860에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AUSTHEAT AHT860 12 페이지. Freestanding electrical hotplate & toaster
페이지 인쇄Return to manufacturer or authorised repairer
for repair prior to use.
This machine contains no user-serviceable parts.
Austheat®, one of our agents, or a similarly
qualified person(s) should carry out repairs.
Keep cord away from heated surfaces.
Do not remove any cover panels from the
machine.
Austheat® will not accept liability if:
Non-authorised personnel have tampered
with the machine
The instructions in this manual have not
been followed
Non-original spare parts are used
There is any damage to the unit
These units should NOT be left unattended
during operation.
During use, these units heat up and can cause
damage or bodily harm if not operated
correctly. Ensure proper signage is in place to
reduce the risk of any hazards.
CLEANING & MAINTENANCE
Switch off at mains switch and allow to cool
before cleaning.
CAUTION: Steel cutting processes used in the
construction of this machine can result in sharp
edges. Avoid contact with sharp edges during
cleaning and maintenance.
Do not clean with the use of a water jet or
immerse in water.
Do not use caustic or abrasive cleaning products
as they will damage the machine.
Empty/clean grease box regularly
Regular cleaning will prevent a build-up of oils
and keep the machine looking new.
No part of this machine (with the exception of
the grease box) should be immersed in water.
Wipe all surfaces of the machine with warm
soapy water using a damp non-abrasive cloth.
WARNING: Some cleaning agents can damage
stainless steel or the polycarbonates/plastics
used in switches and pilot lights. Only ever use
soapy water as a cleaning agent.
Ensure the unit is switched off before any
servicing or inspection is carried out.
Servicing and maintenance should only be
carried out by a qualified technician. It is
recommended that inspections be carried out
annually to ensure the appliance is in line with
changing standards.
INSTALLATION
Remove all packaging materials, tape, and any
protective plastic from the machine. Remove
any glue residue from the protective plastic or
tape using citrus cleaner.
Place the product on a firm, level surface in the
desired position. Do not install within 300mm of
flammable materials. The AH860 has a rear
spacer to set a minimum distance from non-
flammable walls that must never be removed or
modified.
A minimum distance of 500mm above the
cooking plate must be kept clear of any
obstruction. Do not obstruct or in any way close
off the front of the machine.
Install at least 100mm from materials and have a
100mm air gap at the front & rear of the unit. If
the unit is used near combustible material,
common sense should be applied to deem
sufficient distancing.
Consult national standards that outline the
positioning, spacing and ventilation before
installation.
3