Datavideo SLD-1 사용 설명서 - 페이지 7
{카테고리_이름} Datavideo SLD-1에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Datavideo SLD-1 13 페이지. Camera sled
Datavideo SLD-1에 대해서도 마찬가지입니다: 사용 설명서 (14 페이지)
페이지 인쇄INT Mode
The tally light signal comes from the
AD-2
adaptor
mounted to the V-mount battery
plate.
The AD-2 Adaptor powers the rear
and front bi-color tally LEDs and the
USB port, which will thus be able to
supply power.
Switch to INT mode when the AD-2
is mounted.
USB Port
Tally Power
Switch
when
AD-2
Tally IN
Rear Bi-Color
Tally LED
Front Bi-Color
Tally LED
The USB port serves as a power supply
port for an external LED Light when the
SLD-1 is mounted the AD-2 Adaptor.
The power switch toggles between
internal and external power modes.
INT Mode: AD-2 is mounted on the
SLD-1.
EXT Mode: When SLD-1 is used in pair
with the ITC-100SL Intercom Belt Pack.
When using the SLD-1 with the ITC-
is
100SL Intercom Belt Pack, the tally
light signal then comes from the ITC-
100SL and directly supplies power to
the rear and front bi-color tally LEDs
without having to mount a V-mount
battery to the V-mount battery plate.
However, if the V-mount battery plate
is not mounted, the USB port will NOT
be able to supply power.
Switch to EXT mode when used in pair
with the ITC-100SL.
Connects an external tally light signal,
for example the ITC-100SL tally light.
Red indicates LIVE
Green indicates CUED
Red indicates LIVE
Green indicates CUED
6
EXT Mode