DVS EC Automatic 사용자 설명서 - 페이지 2
{카테고리_이름} DVS EC Automatic에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DVS EC Automatic 2 페이지.
DVS EC Automatic에 대해서도 마찬가지입니다: 사용자 설명서 (2 페이지), 사용자 설명서 (4 페이지)
페이지 인쇄
Displayed on the home screen.
Main Display
Will show fan operation
Indication.
Moving symbol = Fan On
Static symbol = Fan Off
Temperature Display
By pressing the
Temperature Display
button you can check
the Temperature at the
control panel and the
Supply Air Temperature
in the system fan. The
associated LED will
illuminate indicating
which temperature
you are viewing. You
can toggle between
System On / Off
each by pressing the
Press for 2 seconds to
Temperature Display
turn the system On / Off.
button more than once.
DVS® EC Automatic Controller User Guide
All manuals and user guides at all-guides.com
LED Indicators
See Temperature
Display.
Air Supply
To increase
or decrease
the calibrated
condensation
control setting
(air supply rate)
press Increase or
Decrease.
Main Display
Pressing either
temperature or Supply temperature will change to
displaying the FAN ON or FAN OFF indication
Turning high temperature
Holding down the
cut out on and off
the shortcut for setting the High Temperature Cut out.
(Factory set to 27
o
)
Both LEDs (house and supply) will flash.
The system will shut off when the supply air is above this
temperature.
The display will show the current High Temp cut out
temperature, or "0F" if the feature is off. Pressing
or
ensure the High Temperature cut out feature is activated.
The feature can be turned off by pressing
until "0F" is displayed.
After 15 seconds without pressing a button, the menu
will exit and return to Fan Operation ON / OFF display.
Please note: 'OF' on the controller means 'OFF'
or
while displaying House
button for 5 seconds will enter
will change the cut out temperature, and
or
Phone 0800 387 387 | www.dvs.co.nz