Agri-Fab 190-163-100 소유자 매뉴얼 - 페이지 7

{카테고리_이름} Agri-Fab 190-163-100에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Agri-Fab 190-163-100 16 페이지. 42 heavy duty lawnsweeper

페이지 인쇄

ASSEMBLY OF HOPPER BAG

1. Insert the left hand upper hopper tube through the

stitched ﬂ aps of the hopper bag, starting at the

center cut out in the top of the bag. See ﬁ gures

7, 8 and 9. Repeat for the right hand upper hopper

tube.

CENTER CUT OUT

(START HERE)

Right

Left

FIGURE 7

2. Slide the two upper hopper tubes together and line up

the center holes as shown in ﬁ gure 8.

FIGURE 8

3. Fasten the upper hopper tubes together using a 1/4" x

1" curved head bolt and a 1/4" hex lock nut. See ﬁ gure

1/4" x 1" CURVED HEAD BOLT

1/4" HEX LOCK NUT

FIGURE 9

UPPER HOPPER TUBE

(LEFT HAND SHOWN)

BAG FLAP

END HERE

UPPER HOPPER TUBES

4. Assemble the two lower hopper tubes together using a

1/4" x 1" curved head bolt and a 1/4" hex lock nut. See

ﬁ gure 10.

1/4" x 1"

CURVED HEAD BOLT

LOWER

HOPPER

TUBE

1/4 " HEX LOCK NUT

FIGURE 10

5. Place the assembled lower hopper tubes into the bottom

of the hopper bag as shown in ﬁ gure 11.

6. Assemble the ends of the upper and lower hopper tubes

together using two 3/8" x 3/4" hex bolts (on the inside)

and two 3/8" hex lock nuts (on the outside). Tighten to

allow bag to pivot freely. See ﬁ gure 11.

LOWER HOPPER TUBE

FIGURE 11

UPPER

HOPPER

TUBE

3/8 " HEX LOCK NUT

(OUTSIDE)

3/8" x 3/4" HEX BOLT

(INSIDE)

HOPPER BAG

BOTTOM