DVS EC Reclaim 사용자 설명서 - 페이지 3

{카테고리_이름} DVS EC Reclaim에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DVS EC Reclaim 4 페이지. Mechanical ventilation with heat recovery (mvhr)

Turning heat purge function on and off and altering the setting (Factory set to off):

To enable the Heat Purge function - Press and hold the temperature display button

house and supply indicators will flash. "OF" (off) will be displayed on the screen.

Adjust to the desired Heat Purge activation temperature, using

We recommend a setting of 27

supply air is above this temperature.

The feature can be turned off by pressing

After 15 seconds without pressing a button, the menu will exit and return to

Fan Operation ON / OFF display.

Note: 'OF' on the controller means 'OFF'

Note: There is no indication on the control panel to show the system is in

Heat Purge Mode.

Programmable High air supply temperature shut off

(This function can be turned off or on and adjusted by the user)

When this function is turned on by the user, the system will continue to supply air until

the system automatically shuts down at the pre-set high temperature cut-out (typically

C). This is to prevent the system adding warmth to a home which is already warm

during warmer periods.

Note: In a standard set up, this function is turned off.

Turning high temperature shut off function on and off and altering the setting

(Factory set to 32

C):

Holding down the

Temperature shut off. Both LEDs (house and supply) will flash.

The system will shut off when the supply air is above this temperature.

The display will show the current High Temp cut out temperature, or "0F" if the feature

is off. Pressing

Temperature cut out feature is activated.

The feature can be turned off by pressing

After 15 seconds without pressing a button, the menu will exit and return to

Fan Operation ON / OFF display.

Note: 'OF' on the controller means 'OFF'

C. The system will automatically increase airflow when the

button for 5 seconds will enter the shortcut for setting the High

will change the cut out temperature, and ensure the High

until "0F" is displayed.

Phone 0800 387 387 | www.dvs.co.nz

buttons.