DVS G3 운영 매뉴얼

{카테고리_이름} DVS G3에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DVS G3 3 페이지. Small inline filter
DVS G3에 대해서도 마찬가지입니다: 운영 매뉴얼 (10 페이지), 피팅 지침 (2 페이지)

OPERATING GUIDE FOR DVS G3

AIR-WARMER

Introduction

The optional DVS

Air-Warmer pre-warms cooler air from your roof space before it

enters your home through the ceiling outlets. The Air-Warmer is designed to take

the 'chill' off incoming air from the DVS

during cooler months, NOT to warm your

home or replace your existing home heating.

The Air-Warmer's thermostat is pre-set at 28ºC for economical use. Depending on

several factors including the roof space air temperature, fan speed and air flow, length of time the Air-

Warmer has been operating and the distance from the Air-Warmer to individual ceiling outlets, the air

entering the home will typically range between 20ºC and 25ºC. The incoming air may not feel especially hot

or warm, but feel about the same temperature as, or slightly warmer than your home. However, because the

incoming air is moving, the temperature felt by the skin can feel cooler than it actually is.

NOTE: Even when the DVS

Air-Warmer is operating you will still need to use normal home heating to

maintain a comfortable living environment, and to assist condensation control.

Setting the DVS

Air-Warmer

The G3

offers several options for controlling the operation of your Air-Warmer.

From the Current Status screen, press MENU three times to access

MAIN MENU 3. Then select AIR WARM which will bring up your MODE options.

Mode

Use the MODE button to select whether the DVS

Air-Warmer operates on Auto, Timer, or Dual modes, or is

turned Off (as shown).

We recommend operating your Air-Warmer on Dual function for maximum

energy efficiency. When set to Dual, the Air-Warmer will only turn on between

the pre-selected times as set in the TIimer menu and WHEN the roof space

temperature drops below the temperature selected in the Auto menu.

Note: The currently selected mode of operation will be displayed on the current

status screen. Whenever the Air-Warmer is operating, shimmering lines will appear over those displayed

words.