Datel TurboFire 사용자 설명서 - 페이지 6

{카테고리_이름} Datel TurboFire에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Datel TurboFire 10 페이지. Wireless controller for ps3
Datel TurboFire에 대해서도 마찬가지입니다: 사용자 설명서 (4 페이지), 사용자 설명서 (4 페이지)

페이지 인쇄

11.1.1. Configuring Sniper

When configuring Sniper you are increasing or decreasing the speed of the analogue sticks by

adjusting the y-axis and x-axis slider bars for each analogue stick. The y-axis is up and down

movement, the x-axis is left and right movement. The centre of a slider bar represents the

normal speed of the axis. When moving a slider bar to the left you are slowing down the x-axis

or y-axis. When moving a slider to the right you are speeding up the x-axis or y-axis.

In order to adjust each of the slider bars you need to scroll up or down to highlight the slider

bar which you would like to adjust. Whilst highlighting the chosen slider bar move each of the

sliders left or right. You can use any of the buttons shown in the following illustration:

Once you are happy with your configuration press the Start button to save the configuration. As

detailed under section '10' you can now activate the feature with your chosen configuration.

11.2. Remap

Button remapping gives you the ultimate control

over the TurboFire EVO layout by allowing you to

choose which buttons should be pressed to activate

each control.

After entering the TurboFire EVO Menu as detailed

under section '9', using the

button select the

Remap image to enter the Remap configuration

screen. If you would like to return to the TurboFire

EVO Menu at any time press the Select button. As

shown in the following illustration, the Remap

configuration screen displays which buttons are

assigned to each of the controls.

11.2.1. Configuring Remap

In order to program which buttons should be pressed to activate each control, please follow

these steps: