4qd PRO-160-HCV 사용 설명서 - 페이지 5

{카테고리_이름} 4qd PRO-160-HCV에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. 4qd PRO-160-HCV 16 페이지.
4qd PRO-160-HCV에 대해서도 마찬가지입니다: 사용 설명서 (16 페이지)

Thermistor input

Can be used to connect 1 or 2 sensors to monitor external temperatures.

Sensor X is connected to C and D, Sensor Y to A and B.

Once the sensors have been installed they must be enabled in the profile menu.

The Pro-160 will accept a standard hobbyist radio control servo signal directly

from a receiver. The receiver should be connected to pins B, C, and D. Pin D is

linked to pin A by Lk1, this can be removed if a 4 wire radio connection is

required.

The Pro-160 is pre-programmed to work with the majority of radio receivers.

Profiles 7 and 8 are configured for RC single ended and RC joystick use.

Depending on your radio system you may need to use the RC learn function to

properly match the Pro-160 to your receiver output.

PRO-160 V2.3/2 04/20

Sensors X and Y should be 4QD

part number SEN-TMP.

Page 5