Agri-Fab 45-0438 소유자 매뉴얼 - 페이지 7
{카테고리_이름} Agri-Fab 45-0438에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Agri-Fab 45-0438 13 페이지. 40 inch front mount dethatcher
페이지 인쇄ATTACHING DETHATCHER TO TRACTOR
•
If the front of your tractor has front mounting holes as
shown in figure 7, continue on to figure 8.
•
If the front of your tractor DOEs NOT have front
mounting holes, go to figure 10.
•
Remove two self threading bolts (if present) from
front cross-member of tractor. Assemble bolts through
lower slots in hitch bracket, then reinstall them back
into front crossmember. (Make sure notches at top of
hitch bracket and crossmember are aligned.)
•
From behind tractor's front crossmember, insert two
3/8" x 1" hex bolts (3) through holes in crossmember
and through upper slots in hitch bracket. Secure with
two 3/8" nylock hex nuts (12).
Go to figure 11 on page 7.
•
FIGURES 9 AND 10 ARE ONLY FOR TRACTORS WITHOUT FRONT MOUNTING HOLES. FOR
ALL OTHER TRACTORS CONTINUE TO FIGURE 11.
27
19
x 1
3
12
x 4
x 1
x 4
FRONT MOUNTING HOLES
SELF THREADING BOLT
12
SELF THREADING BOLT
27
12
6
FRONT
3
19
3
19
7
8
9