CooKing Vintage Cuisine VC1BTM20CR11CP 사용 설명서 - 페이지 9
{카테고리_이름} CooKing Vintage Cuisine VC1BTM20CR11CP에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. CooKing Vintage Cuisine VC1BTM20CR11CP 14 페이지. Retro radio with bluetooth speaker
페이지 인쇄
with a USB socket, using the (included) device power supply /
charging cable.
Power supply / charging connection
Prior to connecting the charging / power supply source to the
device, make sure the applied DC voltage source parameters
are compliant with the ones in the manual and on the rating
plate (5 V
safety extra-low voltage (SELV) source.
Connect the cable with the micro USB plug to the micro USB
socket labelled as DC 5V on the back of the device.
When using the micro USB / USB power supply cable, first con-
nect the USB plug to the USB socket in the DC voltage source
5 V
1 A.
Typical DC voltage sources with USB sockets: computers,
power banks, car chargers with USB, power adapters with mi-
cro-USB plugs or USB sockets, etc.
When the device is in charging mode, the charging status LED
will turn red. It will turn off when the device is fully charged.
How to pair the Bluetooth radio receiver with a mobile device
via Bluetooth
To pair the radio receiver with your phone or another mobile
device, follow the instructions below.
1. Set the ON/OFF switch to ON.
2. Press the MODE button — the blue LED signalling the
BT (Bluetooth) mode will start flashing quickly.
3. Enable Bluetooth in your mobile device and select the
radio receiver on the list of available devices (VC Radio).
4. Connect / pair the devices. The blue BT (Bluetooth) LED
will stop flashing quickly. Instead, it will pulsate every
1 A). In addition, the power source should be a
9